We converted these Cherry stained cabinets over to a pre-catalyzed lacquer finish for durability and clean-ability. Project took 5 days and cost $2,500 for labor and materials. Adding holes/handles cost $200, customer had to provide handles.
Customer bought the materials (wood, glue and quarter round trim) directly from Marilyn at Prosource Floors, using our account and saving them $750. We removed the engineered wood floor installed originally by the builder, then leveled the floor twice to correct pretty serious slab issues. Then installed new engineered wood with All-in-one adhesive to thwart […]
Dismantled cabinets and drawers, sanded and cleaned everything thoroughly. Then sealed all areas with oil based primer/sealer and allowed for full cure time. Then painted two coats high build, pre-catalyzed. ]
Customer saw a neat cabinet project in a magazine that was done in a two tone color format. After our counter top fabricator/installer installed the beautiful Iceberg granite tops, we refinished the top cabinets an off white color and the bottom cabinets in a grey blue color. We then installed a customceramic tile subway-styled backsplash […]
We dismantled cabinets and built a spray booth in the garage. Sanded and cleaned all surfaces and then sealed all surfaces with oil primer/sealer. Allowed for cure times and then sprayed two coats of pre catalyzed lacquer for cabinet durability and cleanability. Then reassembled cabinets installing new handles and hinges. The customer also added crown […]
Customer has a background in art and wanted to design this bathroom herself. All the materials came from ProSource floors. Marilyn helped her to find the right components to make it all work. Customer coordinated with our favorite plumber and electrician directly, saving her approximately $600.
Customers bought tile, glue and grout from ProSource flooring directly saving them $150. We installed backsplash over two days.
We stripped 1950’s era 1″ x 8″ out of closet, removed the ledgers around the perimeter and then went to work!! We installed 3/4″ Birch plywood with 1″ x 2″ ledgers, screwed to studs, not plaster walls. We then sanded/cleaned the new wood before sealing it with a oil-based primer/sealer from Sherwin called ProBlock oil. […]
These folks had a ton of stuff, so they took our advice, and moved most things into a pod. Then we could effectively remove popcorn ceilings and slick out ceilings.
Copyright © 2017 AAA Advanced Residential Rehab, LLC. Jacksonville, FL. All Rights Reserved.
